AUGUST DATES: There’s been a little confusion about the dates of the August embroidery bee. We’ll be meeting and embroidering for three days, WEDNESDAY, AUGUST 8, THURSDAY, AUGUST 9, AND FRIDAY, AUGUST 10. On the questionnaire that went out with the sample kits there’s a typo which I will not reproduce here lest I cause more confusion. These are the right dates. See you in Plymouth.

Tricia describes the process of adapting the embroidery pattern for the cuffs, collar, and wings, (which are absent from the jacket whose embroidery pattern we’re using):

The jacket pattern that we are working with has a collar, cuffs, and the little wings that come from the shoulders. When it came time to transfer the pattern to these pieces, we had to do a little research. The jacket we are adapting does not have these details, so how do we choose? For the collar, we looked at several examples to see if the collar had a mirrored pattern or was cut out from the repeat. The second question to answer was if the design was right side up or upside down when viewed from the back. [Jill here. The collar is a small semi-circular piece of cloth, on the left in the first picture. It is sewn to the center back neckline. The collar hangs down the back, with the embroidered side up. The side that touches the back of the jacket is unworked.] On the ones we looked at, the collar is cut from the repeat such that the curve of a coil fit in the center rounded part of the collar. This means it is viewed upside down when installed in the jacket. The jackets we viewed also showed that the pattern on the collar matched almost exactly the pattern on the part of the back of the jacket which was covered by the collar. So we followed this guidance.

For the wings (the second picture), the examples showed that the design was just cut in the same orientation as the front of the jacket, and the pattern was right side up when viewed from the front. For the cuffs (the two shapes on the right in the first photo), we had a great picture of a cuff laid out before the MET jacket was mounted years ago. It showed that a modification had been made to the design to put a carnation at the center middle, pointing to the free end of the cuff. Then two coils emanated from the bottom of the carnation, each holding a different motif – but mirrored. We tried to follow this lead the first time we drafted the pattern, but the cuffs for the Laton jacket are not as deep as those on the MET jacket, therefore this scheme didn’t work out. Instead, we put a pink motif in the center and cut the design with the edge of the pattern.

(The third picture is two of the five gussets.)

For the gussets, we followed the V&A jacket and used the area of the design that has thistles on it for each of the five gussets.

Tricia